INPUT

Voltage Range Low Line Transfer 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5%
(based on load percentage 100% - 80% / 80% - 70%
/ 70% - 60% / 60% - 0%)
Low Line Comeback  175 VAC ± 5%
High Line Transfer 300 VAC ± 5%
High Line Comeback 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz
Frequency Range 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz
Phase Single phase with ground
Power Factor 0.98

OUTPUT

AC Voltage Regulation (Batt. Mode)  ± 3%
Frequency Range (Synchronized Range   48Hz ~ 52Hz or 57Hz ~ 63Hz
Frequency Range (Batt. Mode) 50Hz ± 0.25Hz or 60Hz ± 0.3Hz
Load Crest Factor 3:1
Harmonice Distortion

4% THD (Linear Load)  

7% THD (Non-linear Load)

Transfer AC Mode to Batt. Mode  Zero
Inverter to Bypass 4ms (Typical)
Waveform (Batt. Mode) Pure Sinewave

EFFICIENCY

ECO Mode 88%
Battery Mode 83%

BATTERY

Battery Type 12Vx9AH (x6)
Typical Recharge Time 4 Hours to Recover to 90% Capacity
Charging Time (Max.) 1.0A
Charging Voltage 82.1 VDC ± 1%

PROTECTION

Full Protection Overload, discharge, thermal, short circuit
and overcharge protection

COMMUNICATIONS & MANAGEMENT

Interface USB or RS232 as standard, Intelligent slot for PSSNMP
or PSA400 dry contact
Software Power Shield NetGuard Software - supports
Windows based operating Systems, Linux, Unix & Mac
LCD Display / Alarm UPS Status, Load Level, Battery Level, Input/Output Voltage,
Battery Time Remaining and Fault Indicators
Audible Alarm Battery Mode, Low Battery, Overload, Fault

PHYSICAL

Dimenesion (D x W x H) 425 x 190 x 335mm
Weight 28kg

OPERATING ENVIRONMENT

Temperature 0°C - 40°C
Humidity 20-90% (RH Non-condensing)
Noise Level Less than 45dBA @ 1 Meter

COMPLIANCE

Safety EN62040-1-1 2003, IEC60950-1-1
EMS EN62040-2 2006
RoHS Directive 2001 / 65 / EU