Your Cart
Restricted User
Model: A9010S
  • Description
  • Specifications
  • Datasheet

ONKYO Intergrated Stereo Amplifier. High-fidelity amplification system. Pure analog playback of vinyl records. Wolfson digital-to-analog converter. Separate headphone amp circuit. Colour Silver


  • 44W/Ch (8Ω, 1kHz, 0.08% THD, 2 Channels Driven, IEC)
  • WRAT (Wide Range Amplifier Technology) with Discrete Amplifier Output Circuitry
  • High-Quality Wolfson WM8718 192kHz/24-bit Digital-to-Analog Converter
  • Four Digital Audio Inputs (Optical and Coaxial)
  • Coaxial Supports Sampling Rates Up to 192kHz/24-bit (Optical 96kHz/24-bit)
  • Independent Headphone Amplification Circuitry
  • High-Current Low-Impedance Drive
  • Four Audio-Grade Capacitors
  • Extruded Aluminium Heat Sink
  • Thick Speaker Plates To Maintain Signal Quality
  • Gold-Plated Screw-type Banana Plug-Compatible Speaker Posts
  • Automatic Digital Circuitry Shutdown Function for Pure Analog Sound
  • Tone Controls (Bass/Treble/Balance)
  • 5 Analog Audio Inputs (4 Rear/1 Front) and 1 Output (Rear)
  • Phono Input (MM) and Phono Equalizer
  • 6.3mm Headphone Jack
  • RI (Remote Interactive) Remote Control
  • Low 0.4W Power Consumption on Standby
Amplifier Section

Power Output

44W/Ch (8Ω, 1kHz, 0.08% THD, 2 Channels Driven, IEC)
THD+N (Total Harmonic Distortion + Noise) 0.08% (1kHz, 1W Output)
Damping Factor 95 (1kHz, 8Ω)
Input Sensitivity and Impedance 150mV/100kΩ (Line)
3.0mV/47kΩ (Phono MM)
Rated RCA Output Level and Impedance 0.15V/2.2kΩ (Line Out)
Phono Overload 94mV (MM, 1kHz, 0.5%)
Frequency Response 10Hz~100kHz/+1dB, -3dB (Line 1)
Tone Control ±10dB, 100Hz (Bass)
±10dB, 10kHz (Treble)
Signal-to-Noise Ratio 92dB (Line, IHF-A)
78dB (Phono MM, IHF-A)
Speaker Impedance 4Ω~16Ω
Power Supply 220V~240V AC ~, 50/60Hz
Power Consumption 155W
No-Sound Power Consumption 25W
Standby Power Consumption 0.4W
Dimensions (W x H x D) 435 x 129.5 x 332.5mm
Weight 6.5kg
Dimensions (W x H x D) 540 x 223 x 397mm
Weight 8.2kg
Supplied Accessories

• Instruction manual
• Remote controller
• AAA (R03) batteries x 2