Your Cart
Restricted User
CYP HDBaseT Splitter 1x4.
  • Description
  • Specifications
  • Datasheet

CYP HDBaseT Splitter 1x4. 1x HDMI Input, 1x HDMI Output, 3x HDBaseT 100m Outputs with POE/LAN. 4Kx2K Res & 3D Support. 2-way IR control.

  • The HDMI over HDMI & CAT5e/6/6A Splitter can split and distribute a single HDMI input, 2-way IR control, and LAN, serving to up to three CAT5e/6/6A outputs, and includes a simultaneous HDMI bypass output.
  • It supports resolutions up to 1080p Full HD, 4K×2K timing, 3D, and multichannel digital audio formats (such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD).
  • The HDMI bypass output can be connected to an HDMI display, or cascaded to another splitter.
  • The three CAT5e/6/6A outputs can be connected to CAT5e/6/6A -to-HDMI receivers to extend the operating distance up to 100 meters.
  • Additionally, the LAN connectivity will allow a 100BaseT network to be served to smart TVs or games consoles.
  • The Power over Ethernet (PoE) function can power compatible receivers, providing greater flexibility in installations.
Video Bandwidth 340Mbps/10.2Gbps
Input Ports 1× HDMI, 1× IR IN, 1× LAN, 1× USB (Service only)
Output Ports 1× HDMI, 3× CAT5e/6/6A, 1× IR OUT
HDMI Supported 480i~1080p@50/60Hz, 1080p@24Hz, 4K×2K 
Resolutions (3840×2160@30Hz/4096×2160@24/25Hz) & VGA~WUXGA (RB)

HDMI Input
Cable Distance

10M (1080p@8/12-bit), 5M (4K×2K)

HDMI Output
Cable Distance 

15M (1080p@8-bit), 10M (1080p@12-bit), 10M (4K×2K)
IR Frequency 30~50kHz
Power Supply 24V/2.7A DC (US/EU standards, CE/FCC/ UL certified)
Dimensions 145mm(W)×199mm(D)×30mm(H)
Weight 590g
Chassis Material Metal
Color Black
ESD Protection Human body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Operating Temperature 0°C ~ 40°C
Storage Temperature −20°C ~ 60°C / −4°F ~ 140°F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 36W


1. This system was tested with CAT6/23AWG cables, results may vary with cables of a different specification.

2. The PoE function is designed for powering compatible Receiver units only, non-PoE Receivers will need their own power supply. Receivers of another brand may not be compatible.

3. For playback of 4K×2K HDMI source signals, a 4K×2K capable display and High-Speed HDMI cables are required.